R IMAGE 1.3 / HD Flexo Pre-Press / By Direct Laser Engraving (DLE)
FLEXOSTAR IMAGE 1.3
The Flexostar Image 1.3 has been specially designed on customer demand from the label and Flexible packaging industry for the creation of printing plates and sleeves.
HIGH QUALITY STANDARD HD
The extreme repetitiveness of direct laser engraving assures high quality and aloows even for a single plate or sleeve out of a set to be replaced, even after years.
|MODEL NO.||PRODUCTION RANGE||PRODUCTION SPEEDS||LINES SCREENING||DOT SIZE UPTO||ELECTRICAL POWER||COOLING REQUIREMENT||DIMENSIONS||ENVIRONMENT|
|1.3Y with 200 – 1200 Watt fiber laser power configurations||1300 mm length||From 250-5000 sqm/year||1 to 85 lines/cm||2000 dots/cm||3 Phase – 380V – 35Amp Fuse||from 3 – 16kW, 8 l/min – 4bar||1440mm x 1480mm x 3820mm||200 C +/- 50 C, dust class < EU 3-4|
|1.3C with 200 – 1200 Watt CO2 laser power configurations||1100 mm circumference||From 0.15 to 1 sqm/hour||215 lines/inch||5080 dots/inch||3 Phase – 380V – 35Amp Fuse||190 C +/- 0.20 C||1440mm x 1480mm x 3820mm||200 C +/- 50 C, dust class < EU 3-4|
THE LOWEST COST
In-The Round Flexo sleeve processing in the market. This unique offer brings you affordable DLE with HD performance, for a price lower than CDI.
Output capacity from 250 to 5,000 m2 /year Image 1.3Y can start with a small laser for imaging flexo sleeves and plates upto 250m2 /year. By adding shifts and laser power capacity can increase to 5,000 m2 .
SHORTEST PRE-PRESS WORKFLOW
Direct laser Engraving gives the shortest possible workflow between image creation and the production of printing plates and sleeves and works with very durable elastomer plates with excellent ink transfer qualities.
EASY AND FLEXIBLE IMPLEMENTATION
Systems works with both stand-alone as connected to intranet or internet. Applied in both workshop environments a well as networked at a customer and controlled by brand management to create global simultaneous release.
GROW WITH YOUR BUSINESS
The Image 1.3Y is dedicated to flexo printing applications with a range of high power fiber lasers from 200 to 1200 Watt. All Flexostar laser engravers can be upgraded to meet increasing production demand.
MORE OUTPUT PER SHIFT WITH MULTI-JOB SOFTWARE
A well prepared cluster of jobs can be started under multi-job control at shift end and run unattended into the night on one long sleeve or plate-on-sleeve configuration with an auto shut-off at the end.
Profiling software provides the user easy file conversion from 1 bit Tiff to 3D engraving format. The flexible software provides image and dot view to optimized dot formation and surface and under surface definition.
Material calibration software saves valuable time when changing over to new material and screening definitions. Any Dot angle, dot elevation and dot height is easily set for optimized printing.
Files simple load from USB or LAN and can be processed either in-line or offline, whatever is workflow is chosen. Material calibration, image files and log files archive automatically.
Multi-job and auto-switch functions allow for planned unattended production outside manned shifts and in weekends.